GB 18671-2009 Translated English of Chinese Standard. GB18671-2009: Intravenous needles for single useThis Standard specifies requirements for single-use intravenous infusion needles of which the nominal outer diameter is 0.36 mm ~ 1.2 mm to ensure adaptability to gravity feed-type infusion sets, infusion sets used with pressure infusion equipment, and transfusion sets. This Standard provides a guide to the properties and quality norms for the materials used in infusion needles. |
Common terms and phrases
4-compliant specification mark accordance with Clause according to Clause address of manufacturer Annex bacterial endotoxin free bevel length biocompatibility evaluation cadmium catheter Clause 4-compliant specification connecting base coordinate diagram corresponding requirements D.3 presents eluate eluent ethylene oxide evaluations and tests exceed Figure A.1 flexible tube graphic symbols presented idt ISO infusion and transfusion infusion needle tip infusion needles supplied infusion sets intravenous infusion needles long bevel angle lot number lubricant manufacturer and/or distributor medical devices meet the corresponding name and Clause needle inner diameters needle tip geometric needle tip puncture needle tube length needle tube outer needles for single nominal outer diameter Note peak force polymeric membrane presented in YY/T pressure infusion equipment primary package pyrogen free second bevel angle sheath sterile tested according tested in accordance tester tip geometric shapes transfusion sets tube outer diameter tube wall type type inspection typical infusion needle word lot words for single